Paint Undertones: How to See Them (With Real Codes)

You picked a gray that looked perfect on the chip. Two coats later it reads green in the morning and faintly purple at night, and the trim suddenly looks yellow. Nothing is wrong with the paint. You just met its undertone.

The short answer: paint undertones are the hidden hue inside a color (yellow, pink, green, blue or violet) that shows up next to other colors and in different light; you see them by comparing, not by staring at one chip, and a room works when its colors lean the same way. Below you'll learn how to spot them yourself, what the common whites, grays and beiges lean toward, and four palettes built from real Sherwin-Williams, Benjamin Moore and Behr colors.

Key takeaways

  • Every paint color has a masstone (the color you see first) and an undertone (the subtle lean that sets it apart from similar colors).
  • Warm undertones lean yellow, orange or red; cool undertones lean blue, green or violet.
  • Undertones are easiest to see when you compare a chip against pure white and look at the darkest chip on the same strip.
  • LRV, on a 0 to 100 scale, tells you how much light a color reflects, which is about lightness, not undertone.
  • Room light changes how undertones read, so always judge a large sample on your own walls at different times of day.

How we put this together: every paint name and code here was checked on the brand's own color page (Sherwin-Williams, Benjamin Moore, Behr) on November 18, 2026, and LRVs come from those pages.

Palette card with Sherwin-Williams Agreeable Gray SW 7029, Alabaster SW 7008, Evergreen Fog SW 9130 and Iron Ore SW 7069, with LRV and undertone for each
Palette card: colors drawn from the brand values.

What a paint undertone actually is

Sherwin-Williams describes every color as two layers: the masstone, which is the obvious color of the chip, and the undertone, "the subtle difference that distinguishes it from similar hues in its color family."[1] Two whites can both look white. One has a drop of yellow in it, the other a trace of gray-blue, and that is the whole difference between a cozy room and a crisp one.

Undertones fall into three groups:

  • Warm: yellow, orange, red or pink leans. These tend to feel cozy and soft.
  • Cool: blue, green or violet leans. These tend to feel fresh and calm, and can feel cold in dim light.[1]
  • Neutral (or balanced): colors where no single lean wins, at least in most light. Few colors are truly neutral; most just lean less.

The tricky part is that undertones are relative. A beige that leans green looks green only when something warmer sits next to it. A white looks yellow only when a cleaner white sits next to it. That's why the same color can be "perfect" in one house and "wrong" in another.

Where LRV fits in

LRV (light reflectance value) is a 0 to 100 scale for how much light a color reflects: the higher the number, the lighter the color looks.[2] It is printed on the brand's color page and usually on the back of the chip. LRV does not tell you the undertone, but it helps in two ways. First, a big LRV gap between walls and trim creates contrast, which makes any undertone difference more visible. Second, lower-LRV colors carry more pigment, so their lean is usually easier to read. Benjamin Moore Revere Pewter (HC-172), at an LRV of 55.05, shows its lean far more than Benjamin Moore Chantilly Lace (OC-65), at 90.04.[11][5]

How to see an undertone yourself

You don't need a color wheel or an app. You need white paper, a few chips and daylight. These steps follow the same advice Sherwin-Williams' color team gives: compare against white, compare against similar colors, and look at the deeper chips.[1]

  1. Put the chip on plain white printer paper. On its own a light gray just looks gray. Against white, it will start to look a little green, blue, violet or beige. Name what you see in one word.
  2. Find the darkest chip on the same strip. Pale chips hide their lean. The deepest color on the strip shares the same base, so a gray whose darkest sibling is a blue-slate is a blue-leaning gray.
  3. Line up three similar colors. Put your gray next to two other grays. The odd one out becomes obvious: one will look warmer, one cooler. This works for whites too.
  4. Hold the chip next to what's staying. Floors, counters, tile, a sofa. A green-leaning beige next to orange oak can look muddy; a pink-leaning greige next to cool marble can look rosy.
  5. Check it in daylight at the window, then in the room at night. North light is cool and tends to bring out blue and green leans; south light is warmer; east and west rooms switch between the two during the day.[2] Warm bulbs push everything warmer.
  6. Go big before you buy. A two-inch chip can't show you how a color behaves across a whole wall, where it reflects onto itself and usually looks a bit darker and stronger.

Test before you paint: paint a large sample board (or use a peel-and-stick swatch), tape it next to your trim and floor, and look at it on two different walls in the morning, at midday and at night before deciding.

Undertones in white paint

Whites are where undertones cause the most surprises, because white trim and ceilings touch every other color in the room. A white is never just white: it leans warm (cream, yellow), cool (gray, blue) or stays fairly clean.

  • Sherwin-Williams Alabaster SW 7008
  • Benjamin Moore White Dove OC-17
  • Behr Blank Canvas DC-003
  • Benjamin Moore Chantilly Lace OC-65
  • Sherwin-Williams Extra White SW 7006
  • Sherwin-Williams Alabaster (SW 7008) is a soft, creamy white with a yellow lean.[3] It reads cozy on walls and gentle as trim next to warm greiges, but it can look yellowish next to a crisp cool white.
  • Benjamin Moore White Dove (OC-17) is a soft white with a touch of gray and warmth; its page lists an LRV of 83.16.[6] It sits between creamy and clean, which is why it pairs easily with both warm and slightly cool walls.
  • Behr Blank Canvas (DC-003) is a creamy white with a gentle yellow lean.[8] Think of it as Behr's answer for people who want warmth without beige.
  • Behr Silky White (PPU7-12) is a soft off-white with a slight beige lean.[7] Next to a stark white it looks warm; next to a beige wall it looks clean.
  • Benjamin Moore Chantilly Lace (OC-65) is a very clean white with little visible lean, with an LRV of 90.04.[5] If you ask "which white paint has no undertone?", it is one of the closest answers, though even clean whites pick up color from the room around them.
  • Sherwin-Williams Extra White (SW 7006) is crisp with a faint cool, gray-blue lean.[4] It suits cool grays and modern spaces, and can feel stark in a north-facing room.

Rule of thumb: match the white's lean to the wall's lean. Creamy whites with warm walls, clean or cool whites with cool walls. When in doubt, a softer middle white like White Dove (OC-17) is the forgiving choice.

Undertones in gray and greige

Yes, gray paint has undertones, and that is exactly why a gray can look green or purple on your wall. Pure gray (only black and white) is rare in paint. Most grays carry a little blue, green or violet, and greiges (gray plus beige) add warmth that can tip toward green or pink.

  • Sherwin-Williams Agreeable Gray SW 7029
  • Sherwin-Williams Repose Gray SW 7015
  • Benjamin Moore Revere Pewter HC-172
  • Benjamin Moore Gray Owl OC-52
  • Behr Silver Drop 790C-2
  • Benjamin Moore Pale Oak OC-20
  • Sherwin-Williams Agreeable Gray (SW 7029) is a light greige that sits on the beige side of gray.[9] It's a warm color that rarely turns cold, and it works with creamy trim.
  • Sherwin-Williams Repose Gray (SW 7015) is a cooler light gray.[10] Depending on the light and what's around it, it can show a hint of violet or, in some rooms, a slight green. This is a classic "why does my gray look purple?" color.
  • Benjamin Moore Revere Pewter (HC-172) is a warmer, deeper greige that can lean green, especially next to very crisp white trim.[11]
  • Benjamin Moore Gray Owl (OC-52) is a light gray with a green-blue lean and an LRV of 64.51.[12] In north light it tends to look cooler and more blue; next to warm wood it can look slightly green.
  • Behr Silver Drop (790C-2) is a pale gray with a hint of beige, so it behaves like a soft greige.[13]
  • Benjamin Moore Pale Oak (OC-20) is a light greige with a soft pink-violet lean and an LRV of 68.64.[14] In warm light it looks like a warm putty; beside a green-leaning beige it can look distinctly rosy.

If your gray looks green, it usually has a green or yellow-green base and is being pushed by cool light or by something pinker nearby. If it looks purple, it likely has a violet base, and blue-ish evening light or warm wood next to it is drawing that out. Moving to a gray from the same strip family won't fix it; switching to a gray with the opposite lean usually does.

Undertones in beige

Beige is warm by definition, but beiges still differ. The two leans that cause trouble are green (which can look muddy beside orange wood or pink tile) and pink (which can look dated beside cool stone).

  • Sherwin-Williams Accessible Beige (SW 7036) is a warm beige-greige that can lean green, particularly beside crisp white or cool light.[15] It looks calm with warm whites and darker greens.
  • Benjamin Moore Edgecomb Gray (HC-173) is a light, warm greige close to beige, with an LRV of 63.09.[16] Despite the name, most people would call it a soft beige on the wall.

Pale Oak (OC-20) from the gray section also works as a "pink-leaning beige" for many rooms. Put Pale Oak (OC-20) and Accessible Beige (SW 7036) side by side and you'll see the classic clash: each makes the other's undertone louder.

Greens, blues and darks

Saturated colors show their undertone more openly, but leans still matter when you pair them with whites and neutrals.

  • Sherwin-Williams Sea Salt SW 6204
  • Sherwin-Williams Evergreen Fog SW 9130
  • Benjamin Moore Hale Navy HC-154
  • Sherwin-Williams Iron Ore SW 7069
  • Behr Cracked Pepper PPU18-01
  • Sherwin-Williams Sea Salt (SW 6204) is a pale gray-green that can drift blue in cool light.[17] It pairs with clean whites more happily than with very creamy ones.
  • Sherwin-Williams Evergreen Fog (SW 9130) is a muted mid-tone green with a lot of gray in it.[18] That gray keeps it flexible: it sits well with warm greiges and creamy whites.
  • Benjamin Moore Hale Navy (HC-154) is a deep navy softened with gray, with an LRV of 8.36.[19] Some navies lean green and some lean purple; this one reads as a grayed blue, which makes it easy with cool grays.
  • Sherwin-Williams Iron Ore (SW 7069) is a soft charcoal near-black that the brand files under neutrals.[20] It reads slightly warm, so it suits doors and cabinets in warm palettes.
  • Behr Cracked Pepper (PPU18-01) is a soft black on the charcoal side.[21] It's a good dark accent when you want contrast without adding a new color family.

Paint undertone comparison table

LRVs below come from each brand's color page. "Leans" is how the color tends to read next to white in average daylight; your light can shift it.

ColorBrand codeLRVLeansPairs with
Chantilly LaceBenjamin Moore OC-6590.04Clean, little leanCool grays, navy, greens
Extra WhiteSherwin-Williams SW 700686Cool gray-blueCool grays, Repose Gray (SW 7015)
Blank CanvasBehr DC-00384Warm creamGreiges, beiges
White DoveBenjamin Moore OC-1783.16Soft warmWarm and pink-leaning greiges
Silky WhiteBehr PPU7-1283Soft beigeLight greiges, Silver Drop (790C-2)
AlabasterSherwin-Williams SW 700882Warm yellowWarm greiges, muted greens
Silver DropBehr 790C-270Neutral greigeSoft off-whites, soft black
Pale OakBenjamin Moore OC-2068.64Pink-violetSoft warm whites, charcoal
Gray OwlBenjamin Moore OC-5264.51Green-blueClean whites, navy
Sea SaltSherwin-Williams SW 620463Green, can go blueClean whites, navy
Edgecomb GrayBenjamin Moore HC-17363.09Warm greigeCreamy whites, warm wood
Agreeable GraySherwin-Williams SW 702960Warm greigeCreamy whites, muted greens
Repose GraySherwin-Williams SW 701558Cool, hint of violetCool whites, navy
Accessible BeigeSherwin-Williams SW 703658Warm, can go greenWarm whites, darker greens
Revere PewterBenjamin Moore HC-17255.05Warm greige, green leanSoft warm whites
Evergreen FogSherwin-Williams SW 913030Gray-greenCreamy whites, warm greiges
Hale NavyBenjamin Moore HC-1548.36Grayed blueClean whites, cool grays
Cracked PepperBehr PPU18-018Soft blackGreiges, off-whites
Iron OreSherwin-Williams SW 70696Warm charcoalWarm greiges, creamy whites

Example palettes that keep undertones in line

Each palette below keeps one undertone direction and uses LRV to step from light to dark. Room images are illustrations of how the colors could sit together.

Palette 1: Warm greige and deep green

Agreeable Gray (SW 7029) on the walls, Alabaster (SW 7008) on the trim, Evergreen Fog (SW 9130) on the lower cabinets and Iron Ore (SW 7069) on a door. All four lean warm or earthy, so nothing turns sour.

Palette 1 · Warm greige and deep green

Sherwin-WilliamsAgreeable GraySW 7029 · LRV 60warm greigeWalls
Sherwin-WilliamsAlabasterSW 7008 · LRV 82warm (yellow)Trim
Sherwin-WilliamsEvergreen FogSW 9130 · LRV 30gray-greenCabinets
Sherwin-WilliamsIron OreSW 7069 · LRV 6warm charcoalDoor

Why it works: Every color here sits on the warm, earthy side: Agreeable Gray's beige lean matches Alabaster's soft yellow, so the trim looks creamy instead of dingy. Evergreen Fog adds a mid-depth step and Iron Ore anchors it, so the LRVs step down from light to dark with no undertone fighting.

Open-plan living room with warm greige walls, creamy white trim, sage green kitchen cabinets and a charcoal back door (AI illustration)
AI illustration of palette 1. Colors on screen are approximate.

Palette 2: Cool gray, clean white and navy

Gray Owl (OC-52) walls, Chantilly Lace (OC-65) trim, Hale Navy (HC-154) cabinets and a Sea Salt (SW 6204) accent wall. The cool side stays consistent from palest to darkest.

Palette 2 · Cool gray, clean white and navy

Benjamin MooreGray OwlOC-52 · LRV 64.51cool (green)Walls
Benjamin MooreChantilly LaceOC-65 · LRV 90.04clean neutralTrim
Benjamin MooreHale NavyHC-154 · LRV 8.36cool (navy)Cabinets
Sherwin-WilliamsSea SaltSW 6204 · LRV 63cool (green)Accent

Why it works: Gray Owl and Sea Salt both lean green-blue, and Hale Navy is a grayed blue, so the cool side stays consistent. Chantilly Lace is clean enough that it won't look yellow next to them. Skip creamy whites here: they look dirty against cool grays.

Kitchen with pale cool gray walls, bright white upper cabinets and trim, and deep navy lower cabinets (AI illustration)
AI illustration of palette 2. Colors on screen are approximate.

Palette 3: Behr soft neutrals with a black door

Silver Drop (790C-2) walls, Silky White (PPU7-12) trim, Blank Canvas (DC-003) on the ceiling and Cracked Pepper (PPU18-01) on the front door. All four are Behr colors, so you can have them mixed at the same store.

Palette 3 · Behr soft neutrals with a black door

BehrSilver Drop790C-2 · LRV 70neutral greigeWalls
BehrSilky WhitePPU7-12 · LRV 83warm (beige)Trim
BehrBlank CanvasDC-003 · LRV 84warm (cream)Ceiling
BehrCracked PepperPPU18-01 · LRV 8soft blackDoor

Why it works: Silver Drop is a pale greige, so a soft off-white like Silky White suits it better than a stark white. Blank Canvas lifts the ceiling with a slightly creamier, higher-LRV white, and Cracked Pepper gives one strong dark note without adding a new undertone.

Entryway with pale greige walls, soft off-white trim, a creamy white ceiling and a soft black front door (AI illustration)
AI illustration of palette 3. Colors on screen are approximate.

Palette 4: Pink-leaning greige for warm rooms

Pale Oak (OC-20) walls with White Dove (OC-17) trim and Iron Ore (SW 7069) on a painted dresser or built-in. This one works well in rooms with warm floors and cream textiles.

Palette 4 · Pink-leaning greige for warm rooms

Benjamin MoorePale OakOC-20 · LRV 68.64pink/violetWalls
Benjamin MooreWhite DoveOC-17 · LRV 83.16soft warmTrim
Sherwin-WilliamsIron OreSW 7069 · LRV 6warm charcoalFurniture

Why it works: Pale Oak's soft pink-violet lean pairs with White Dove's gentle warmth; a cold white would make the walls look pinker. Iron Ore keeps it grounded. Avoid green-leaning beiges in the same sightline.

Common undertone mistakes

  • Judging a chip on its own. Undertones only appear in comparison. Always hold the chip next to white and next to its neighbors.[1]
  • Using the pale chip to decide. Look at the darkest chip on the strip to learn which way the whole family leans.
  • Mixing opposite leans in one view. A green-leaning beige like Accessible Beige (SW 7036) in the hall and a pink-leaning greige like Pale Oak (OC-20) in the next room will make each other look off.
  • Pairing a creamy white with a cool gray. Alabaster (SW 7008) next to Gray Owl (OC-52) can make the trim look dingy and the walls look bluer. Use a cleaner white such as Chantilly Lace (OC-65) instead.
  • Ignoring the light direction. Cool undertones can feel colder in north-facing rooms, so Sherwin-Williams suggests warm undertones there.[2]
  • Forgetting the fixed finishes. Wood floors, counters and tile have undertones too, and they won't change. Choose paint to suit them, not the other way around.

Where to go next

This guide is the starting point for our undertone series. Browse all undertone guides, see our white paint guides, find pairings in color pairings, or explore green paint colors.

Sources

  1. Sherwin-Williams, "What's in a Color? Understanding Paint Undertones": blog.sherwin-williams.com
  2. Sherwin-Williams, "How to Choose Paint Colors Based on Room Direction": sherwin-williams.com
  3. Sherwin-Williams Alabaster SW 7008: color page
  4. Sherwin-Williams Extra White SW 7006: color page
  5. Benjamin Moore Chantilly Lace OC-65: color page
  6. Benjamin Moore White Dove OC-17: color page
  7. Behr Silky White PPU7-12: color page
  8. Behr Blank Canvas DC-003: color page
  9. Sherwin-Williams Agreeable Gray SW 7029: color page
  10. Sherwin-Williams Repose Gray SW 7015: color page
  11. Benjamin Moore Revere Pewter HC-172: color page
  12. Benjamin Moore Gray Owl OC-52: color page
  13. Behr Silver Drop 790C-2: color page
  14. Benjamin Moore Pale Oak OC-20: color page
  15. Sherwin-Williams Accessible Beige SW 7036: color page
  16. Benjamin Moore Edgecomb Gray HC-173: color page
  17. Sherwin-Williams Sea Salt SW 6204: color page
  18. Sherwin-Williams Evergreen Fog SW 9130: color page
  19. Benjamin Moore Hale Navy HC-154: color page
  20. Sherwin-Williams Iron Ore SW 7069: color page
  21. Behr Cracked Pepper PPU18-01: color page

Frequently Asked Questions

How do you tell what undertone a paint color has?

Put the chip on plain white paper, then look at the darkest chip on the same strip and compare your color with two similar ones. Whichever way it looks different (greener, pinker, bluer, yellower) is its undertone. Confirm with a large sample in your own room.

What are the undertones in white paint?

Whites lean warm (yellow or cream, like Alabaster (SW 7008) or Blank Canvas (DC-003)), cool (gray or blue, like Extra White (SW 7006)), or stay fairly clean, like Chantilly Lace (OC-65). Match the white's lean to your wall color.

Why does my gray paint look green or purple?

Most grays contain a little green, blue or violet. Cool north light, warm wood or a pinker color nearby can pull that hidden lean forward. Swapping to a gray with the opposite lean usually fixes it better than going lighter or darker in the same family.

What does LRV mean on a paint chip?

LRV is light reflectance value: a 0 to 100 measure of how much light a color reflects. Higher numbers look lighter. It describes lightness, not undertone, but it helps you plan contrast between walls, trim and accents.

Do undertones change with lighting?

The pigment doesn't change, but what you see does. North light tends to bring out blue and green leans, south light warms colors up, and east- and west-facing rooms shift through the day. Bulb color matters too, so check samples at night as well as in daylight.

Which white paint has no undertone?

No paint is perfectly free of undertone, but some whites lean very little. Benjamin Moore Chantilly Lace (OC-65) is one of the cleanest common options. Even a clean white will reflect the colors around it, so test it next to your walls and floors.

Room images in this article are AI illustrations and colors on screens are approximate. Paint names and codes are real and were checked on each brand's color page; always test a physical sample in your own light before you buy.

Yorumlar